Updated IEC International Electrotechnical Commission Blog

IEC 60454-3-1:1998-Pressure-sensitive adhesive tapes for electrical purposes-Part 3: Specifications for individual materials-Sheet 1: PVC film tapes with pressure-sensitive adhesive, IEC 60335-2-8:2012/AMD2:2018-Amendment 2-Household and similar electrical appliances-Safety-Part 2-8: Particular requirements for shavers, IEC 60794-1-24:2014-Optical fibre cables-Part 1-24: Generic specification-Basic optical cable test procedures-Electrical test methods, IEC TS 62371:2008-Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V, IEC/IEEE 62582-1:2011-Nuclear power plants-Instrumentation and control important to safety-Electrical equipment condition monitoring methods-Part 1: General, IEC 61326-3-2:2017-Electrical equipment for measurement, IEC 60364-5-54:2011/AMD1:2021-Amendment 1-Low-voltage electrical installations-Part 5-54: Selection and erection of electrical equipment-Earthing arrangements and protective conductors, IEC 60335-2-73:2002+AMD1:2006+AMD2:2009 CSV-Household and similar electrical appliances-Safety-Part 2-73: Particular requirements for fixed immersion heaters, IEC 61508-1:2010-Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 1: General requirements (see Functional Safety and IEC 61508), IEC 60601-1-9:2007-Medical electrical equipment-Part 1-9: General requirements for basic safety and essential performance-Collateral Standard: Requirements for environmentally conscious design. For more, see this IEC 60601-2-16:2018-Medical electrical equipment-Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment for all the info.



IEC 60480:2019-Specifications for the re-use of sulphur hexafluoride (SF₆) and its mixtures in electrical equipment, IEC 61540:1997/AMD1:1998-Amendment 1-Electrical accessories-Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs), IEC 62011-3-1:2003-Insulating materials-Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes-Part 3-1: Specifications for individual materials-Tubes and rods of rectangular and hexagonal cross-section, IEC TR 61189-3-914:2017-Test methods for electrical materials, IEC 60335-2-85:2002/AMD1:2008-Amendment 1-Household and similar electrical appliances-Safety-Part 2-85: Particular requirements for fabric steamers, IEC 61242:1995/AMD2:2015-Amendment 2-Electrical accessories-Cable reels for household and similar purposes, IEC 60335-2-69:2021-Household and similar electrical appliances-Safety-Part 2-69: Particular requirements for wet and dry vacuum cleaners, IEC PAS 60512-27-200:2018-Connecteurs for electrical and electronic equipment-Tests and measurements-Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors-Tests 27a to 27g, IEC TR 61156-1-2:2009/AMD1:2014-Amendment 1-Multicore and symmetrical pair/quad cables for digital communications-Part 1-2: Electrical transmission characteristics and test methods of symmetrical pair/quad cables, IEC 61196-1-102:2005-Coaxial communication cables-Part 1-102: Electrical test methods-Test for insulation resistance of cable dielectric. Follow this IEC 60335-2-109:2010/AMD2:2016-Amendment 2-Household and similar electrical appliances-Safety-Part 2-109: Particular requirements for UV radiation water treatment appliances for more PDFs.



IEC 60335-2-75:2012/AMD2:2018-Amendment 1-Household and similar electrical appliances-Safety-Part 2-75: Particular requirements for commercial dispensing appliances and vending machines, IEC 61340-4-1:2003/AMD1:2015-Amendment 1-Electrostatics-Part 4-1: Standard test methods for specific applications-Electrical resistance of floor coverings and installed floors, IEC TS 62101:2005-Electrical insulation systems-Short-time evaluation of combined thermal and electrical stresses, IEC 60335-2-52:2002-Household and similar electrical appliances-Safety-Part 2-52: Particular requirements for oral hygiene appliances, IEC 60469-2-Corrigendum 1-Low-voltage electrical installations-Part 5-52: Selection and erection of electrical equipment-Wiring systems, CISPR 15:2018-Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment, IEC 62128-2:2013-Railway applications-Fixed installations-Electrical safety, IEC 60601-2-17:2013-Medical electrical equipment-Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment, IEC 62610-5:2016-Mechanical structures for electrical and electronic equipment-Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series-Part 5: Cooling performance evaluation for indoor cabinets, IEC 60512-9-5:2020-Connectors for electrical and electronic equipment-Tests and measurements-Part 9-5: Endurance tests-Test 9e: Current loading. Follow this IEC 62125:2019-Environmental considerations specific to insulated electrical power and control cables for the best info.



IEC TS 62607-4-1:2015-Nanomanufacturing-Key control characteristics-Part 4-1: Cathode nanomaterials for nano-enabled electrical energy storage-Electrochemical characterisation, IEC 60512-2-3:2002-Connectors for electronic equipment-Tests and measurements-Part 2-3: Electrical continuity and contact resistance tests-Test 2c: Contact resistance variation, IEC 60364-7-712:2017-Low voltage electrical installations-Part 7-712: Requirements for special installations or locations-Solar photovoltaic (PV) power supply systems, IEC 60335-2-50:2002/AMD1:2007-Amendment 1-Household and similar electrical appliances-Safety-Part 2-50: Particular requirements for commercial electric bains-marie, IEC 60893-3-7:2003+AMD1:2009 CSV-Insulating materials-Industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3-7: Specifications for individual materials-Requirements for rigid laminated sheets based on polyimide resins, IEC 60034-19:2014-Rotating electrical machines-Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies, IEC 60730-2-6:2015/AMD1:2019-Amendment 1-Automatic electrical controls-Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements, IEC 60799:2018-Electrical accessories-Cord sets and interconnection cord sets, IEC 60335-2-40:2018-Household and similar electrical appliances-Safety-Part 2-40: Particular requirements for electrical heat pumps, IEC TR 60788:2004-Medical electrical equipment-Glossary of defined terms.